background image

99

VQT3B52

Deletes face recognition information from scenes in which faces were recognised.

Change the mode to 

 and touch the play mode select icon to select [SD CARD]/

[1080/50p] or [SD CARD]/[AVCHD]. (

l

32)

Change the mode to 

 and touch the play mode select icon to select [SD CARD]/

[1080/50p], [SD CARD]/[AVCHD], [Built-inMemory]/[1080/50p] or [Built-inMemory]/
[AVCHD]. (

l

32)

1

Select the menu.

2

Touch the desired scenes to be deleted personal information.

 appears at scenes for which faces were recognised. Touch one of the scenes at which 
 appears.

 will change to 

 (red) when touched. Touch the 

 (red) again to cancel the 

operation.

 Up to 99 scenes can be selected in succession.

3

Touch [Delete] or press the 

 button.

To continuously delete other personal information, repeat steps 2-3.

Press the MENU button to complete the settings.

When you stop deleting halfway

Touch [CANCEL] or press the MENU button while deleting personal information.

 The personal information that have already been deleted when the deletion is cancelled 
cannot be restored.

During disc playback when connected to a DVD burner (optional), scenes/still pictures 
cannot be deleted.

Deleting personal information

: [VIDEO SETUP] 

#

 [DELETE PERSONAL INFO]

Summary of Contents for HDC-SDT750




































































































































































Reviews: