Panasonic HDC-SDT750, Operating Instructions Manual

Page: 86 / 163

86
VQT3B52
Perform focus adjustments using the multi manual ring.
If auto focusing is difficult due to the conditions, then use manual focus.
¬
Change the mode to or .
≥
Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual
mode. (
l 83)
≥
For how to perform the settings when using the viewfinder, refer to page 83.
A
Rotate the multi manual ring to adjust the focus.
1
(When MF assist function is used)
Select the menu.
≥ Touch to display the manual icon.
2
Touch [FOCUS].
3
Touch [MF] to change to
manual focus.
≥
MF appears on the screen.
4
Adjust the focus by rotating
the multi manual ring.
A
Part displayed in blue
The in-focus area is displayed in blue. The
normal screen returns approximately
2 seconds after you finish bringing the
subject into focus.
≥
When [MF ASSIST] is [OFF], the blue
area is not displayed.
≥
To restore auto focus, touch [AF] in step 3
or press the iA/MANUAL button again.
≥
When adjusting the focus, you cannot
zoom using the multi manual ring.
≥
The blue display does not appear on the
images actually recorded.
Recording with manual focus
CAMERA
FUNCTION
/MANUAL
 
: [RECORD SETUP]
#
[MF ASSIST] # [ON]
≥ It is possible to set from the quick
menu. (
l 36)
F
F
MF MF
IRIS SHTR WB FOCUS