Panasonic HDC-SDT750, Workshop Manual

Page: 80 / 176

80
VQT3B18
Parts where white saturation (color saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed with
diagonal lines (zebra pattern).
≥
Change the mode to or .
≥
Switch to Manual Mode. (
l
86)
≥
You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (iris/gain) (
l
88).
≥
The zebra pattern does not appear on the images actually recorded.
Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance
level of the object, when recording same object in different surroundings.
Adjust the brightness using [IRIS]. (
l
88)
≥
Change the mode to or .
≥
Switch to Manual Mode. (
l
86)
≥
Luminance level is displayed between [0%] and [99%]. It will be displayed as [99% ] when
it is over 99%.
≥
Luminance is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF].
[ZEBRA]
: [RECORD SETUP]
#
[ZEBRA]
#
[ON]
≥
It is possible to set from the quick menu in Manual
Mode. (
l
41)
[LUMINANCE]
: [RECORD SETUP]
#
[LUMINANCE]
#
desired setting
≥
It is possible to set from the quick menu in Manual Mode. (
l
41)
[OFF]:
Cancel the setting.
[ALWAYS]:
Constantly display.
[ON ADJUST]:
Display only when [IRIS] is adjusted. (
l
88)
A
Luminance display frame
B
Luminance level
A Zebra pattern
50%
HDC-SDT750&TMT750-P-VQT3B18_mst.book 80 ページ ２０１０年８月２０日 金曜日 午後３時５３分