58
VQT1H62
Recording
3
Press the cursor button to set
and then press the MENU button
to finish the setting.
D
Microphone input level meter
≥
Microphone input level meter is displayed on
the screen.
To return to automatic setting
Press the MENU button, then select [VIDEO]
#
[MIC LEVEL]
#
[AUTO], and press the cursor
button.
≥
Adjust the gain value so that the last 2 bars of
the microphone input level on the center of the
screen are not red. (Otherwise, the sound is
distorted.) Select a lower setting for gain value
or set [MIC LEVEL] to [AUTO].
≥
The microphone input level meter displays the
microphone input level for the built-in
microphone with the larger volume.
≥
When [ZOOM MIC] is [ON], the volume will be
different depending on the zoom rate. Set
[ZOOM MIC] to [OFF] or set the microphone
input level after adjusting the zoom rate.
(
l
49)
Parts where white saturation (color saturation) is
likely to occur (extremely brightly lit or shiny
parts) are displayed with diagonal lines (zebra
pattern).
¬
Rotate the mode dial to select
.
Press the MENU button, then select
[ADVANCED]
#
[ZEBRA]
#
[ON]
and press the cursor button.
A
Zebra pattern
≥
You can record an image with little white
saturation if you manually adjust the shutter
speed or brightness (iris/gain) (
l
63).
To cancel the zebra display
Press the MENU button, then select
[ADVANCED]
#
[ZEBRA]
#
[OFF] and press
the cursor button.
≥
The zebra pattern does not appear on the
images actually recorded.
This unit displays a 7 color bar which is useful for
adjusting the picture quality of the TV or the
external monitor.
¬
Rotate the mode dial to select
.
Press the MENU button, then select
[ADVANCED]
#
[COLOR BAR]
#
[ON] and press the cursor button.
To cancel the color bar
Press the MENU button, then select
[ADVANCED]
#
[COLOR BAR]
#
[OFF] and
press the cursor button.
Zebra display
Displays portions of the image that
may be overexposed.
D
Color bar
This is for displaying a color bar to
check the color tone.
A
VQT1H62_ENG_PP.book 58 ページ ２００７年７月１７日 火曜日 午後５時４４分
