23
VQT2Z66
Preparation
Setup
5
About the LCD monitor/
viewfinder
You can operate by directly touching the LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with
your fingers.
≥
The unit supports both operations using the cursor buttons and operations using the touch
screen. Select the optimal method according to the situation.
≥
In this operating instructions, the majority of functions are described on the basis of
operations using the cursor buttons.
∫
Touch
Touch and release the touch screen to select
icon or picture.
≥
Touch the centre of the icon.
≥
Touching the touch screen will not operate
while you are touching another part of the
touch screen.
∫
Drag
Move your finger while pressing on the touch
screen. Can be used during direct playback.
∫
About the operation icons
≥
To operate the following icons using the cursor buttons, select the desired icon using the
cursor buttons and then press the button in the centre. (Excluding some functions)
/
/
/
:
These icons are used to switch the menu and
thumbnail display page, for item selection and setting
etc.
:
This icon is used to return to the previous screen such
as when setting menus.
How to use the touch screen
HDC-MDH1GC-VQT2Z66_mst.book 23 ページ ２０１０年８月４日 水曜日 午前９時２９分
