Panasonic HDC-HS300P, Service Manual

Page: 23 / 105

23
6 Service Mode
1. Indication method of the service menu
Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until the
top screen of the Service Mode Menu being displayed.
Service mode menu
NOTE:
Do not using service mode except above table of Service Menu.
3. End method of the top screen of the service menu
Push the menu button to end the service mode, and then POWER OFF.
Screen display Contents Function
1 Factory settings Function to throw a product up in a factory shipment state
(When recorded data in HDD, “error display” is done)
2 Drive information display Fall detection frequency of HDD, Frequency that exceeds high-
est/lowest operation guarantee temperature and serial number
display
3 HDD self check execution Function to check self as for the state of HDD
4 Lock search history indication Display an error cord for three histories saved in EEPROM
5 Power ON self check result display Power ON self check (function to diagnose correct function of
the device and interface between devices) result display
6 HDD hardware test Function to confirm state of HDD hardware