manualshive.com logo in svg

Panasonic HDC-HS25, Operating Instructions Manual

Share
Download
Panasonic HDC-HS25 Operating Instructions Manual Download Page 131

131

VQT2B44

*1

 only

*2

 only

If faulty management information is found, one of the following messages may appear. Be sure to follow 
the messages. (Repairing may take time depending on the error.)

*1

 only

*2

 only

≥

The following message is displayed when abnormal management information is detected when the 
scenes are displayed in thumbnail. To perform the repair, touch the scene with 

°

 in the thumbnail, 

and start the playback. Please be aware that if the repair fails, scenes with 

°

 will be deleted.

≥

Use a sufficiently charged battery or the AC adaptor.

≥

Depending on the condition of the data, it may not be possible to completely repair the data.

≥

When data recorded on another device is recovered, it may not be possible to play back the data on 
this unit or the other device.

≥

If recovery fails, turn the power of the unit off and on again after waiting a while. If recovery fails 
repeatedly, format a media on the unit. Please be aware that if a media is formatted, then all the data 
recorded on the media will be erased.

≥

If the thumbnail information is recovered, displaying the thumbnails may become slower.

About recovery

CONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD)

CONTROL DATA ERROR DETECTED IN THE BUILT-IN MEMORY.

*1

CONTROL DATA ERROR HAS BEEN DETECTED. (HDD)

*2

THUMBNAIL DATA ERROR IS DETECTED.

SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED. (IRREPARABLE 
SCENES WILL BE DELETED.)

HDCSD20&TM20&HS25EB-VQT2B44_mst.book  131 ページ  ２００９年１月５日　月曜日　午後２時４４分

Summary of Contents for HDC-HS25

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands