Panasonic HDC HS100 - Flash Memory High Definition Camcorder Operating Instructions Manual Download Page 124

Page: 124 / 144

124

VQT1U19

ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.

An irregularity in the unit has been detected. Restart the unit by turning off and on the power.

CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE USB CABLE FROM THIS UNIT.

The DVD burner is not correctly connected.
Disconnect and then reconnect the Mini AB USB Connection Cable.

Connect a DVD burner that is compatible with this unit. (

96)

PLEASE CHECK EXTERNAL DRIVE OR DISC.

A disc that cannot be used when connecting the unit to the DVD burner has been inserted, or the
DVD burner is not recognised properly. Connect the Mini AB USB Connection Cable again and
insert a disc to copy the data. (

96)

CANNOT COPY TO DISC WITH RECORDED IMAGES. INSERT DISC WITH NO RECORDED
IMAGES.

Data cannot be copied since a disc that cannot be used by connecting the unit and the DVD burner
or a used disc is inserted. Please use a new disc. (

96)

DISCONNECT USB CABLE.

The unit cannot correctly establish the connection to the PC, printer. Disconnect and then reconnect
the USB cable.

DISCONNECT USB CABLE.

You cannot turn off this unit while it is connected to a PC, a DVD burner.

Summary of Contents for HDC HS100 - Flash Memory High Definition Camcorder

















































































































































Search results

Summary of Contents for HDC HS100 - Flash Memory High Definition Camcorder

Reviews:

Brands by name

Popular brands

Panasonic HDC HS100 - Flash Memory High Definition Camcorder, Operating Instructions Manual

Search results

Summary of Contents for HDC HS100 - Flash Memory High Definition Camcorder

Reviews:

Brands by name

Popular brands