Panasonic HD-PLC DA-PU100, Operating Manual

Page: 12 / 16

*2
This product uses the "Store and Forward" method, in which it accumulates commands/
responses and then forwards them. Therefore, some forwarding delay will occur.
*3
The master/slave setting for RS-485 is separate from the MASTER/TERMINAL setting
for PLC.
*4
Shielded twisted-pair wiring is recommended.
USB port
USB USB 2.0 / USB 1.1 (Type-A)
*1
Forwarding method Control forwarding, bulk forwarding, interrupt forwarding.
*2
Number of connected
devices Max. 5 devices per 1 adaptor (including hubs). *3
The number of connected devices that can be used on 1 PC is
64 devices.
*3
*1
The communication distance and communication speed may vary depending on the
connected devices and operating environment. Also, this product does not support high-
speed data transfer.
*2
Web cameras, USB speakers, or other USB devices that use isochronous forwarding for
real-time operation cannot be used with this product. Other USB devices might also not
be usable depending on their driver specifications.
*3
The number of devices that can be connected depends on the usage environment and
the type of device.
12