Note:
R
A 3.5 second pause is inserted each time
M
PAUSE
N
is pressed.
Answering calls
When a landline call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received, the
CELL indicator and SP-PHONE indicator flash
rapidly.
1
Press
MZN
when the unit rings.
R
You can also answer the cellular call
by pressing
M
CELL 1
N
or
M
CELL 2
N
.
2
Speak into the microphone.
3
When you finish talking, press
MZN
.
Adjusting the base unit ringer volume
Press
MDN
or
MCN
repeatedly to select the
desired volume while ringing.
R
To turn the ringer off, press and hold
MCN
until the unit beeps.
Note:
R
You can adjust the ringer volume for
cellular call and landline call by
programming (page 52, 53).
R
The ringer volume you set is kept for each
line (landline and cellular lines).
Useful features during a
call
Hold
1
Press
M
HOLD
N
during an outside call.
2
To release hold on the cellular line:
Press
M
CELL 1
N
or
M
CELL 2
N
.
R
A handset user can take the call:
M
CELL
a
MbN
: Select the
corresponding cellular phone.
a
M
SELECT
N
*1 The call is taken in the following
situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 20).
To release hold on the landline:
Press
MZN
.
R
A handset user can take the call by
pressing
M
N
.
Note:
R
While a landline call is on hold, the
SP-PHONE indicator flashes.
R
After holding for 10 minutes, the call is
disconnected.
Mute
1
Press
M
MUTE
N
during a call.
R
The SP-PHONE indicator flashes.
2
To return to the call, press
M
MUTE
N
.
Note:
R M
MUTE
N
is a soft key visible on the display
during a call.
Flash for landline calls
M
FLASH
N
allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R
To change the flash time, see page 51.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services,
the 2nd
caller’s information is displayed on the unit
that is in use after you hear the call waiting
tone.
1
Press
M
CALL WAIT
N
to answer the 2nd
call.
For assistance, please visit http://shop.panasonic.com/support
29
Making/Answering Calls Using the Base Unit
KX-TG885SK(en)_1215_ver040.pdf 29
12/15/2017 5:04:13 PM
