Panasonic HC-X2 Operating Instructions Manual Download

Page: 278 / 313

Network Connection – Connecting to the iPhone/iPad or Android terminal

278

Connecting to the iPhone/iPad or Android terminal

The unit can be operated from the iPhone/iPad or Android terminal.

≥

Unit settings: 278

≥

Preparing the HC ROP app: 279

≥

Connecting to the HC ROP app: 279

≥

Operation while the HC ROP app is connected: 279

Unit settings

Specifying the network settings

Specify the network settings. (

Network settings: 271

)

Setting the user account name and the password

Set the user account and password for entry into the HC ROP app.

Select the [NETWORK] menu

[IP REMOTE]

[USER ACCOUNT].

Enter the user account name and select [Enter].

•

Enter the user account name with 31 characters or less.

Enter the password and select [Enter].

•

Enter a password between 8 characters and 15 characters.

To enter a character

Operation is the same as entering with a keyboard.

Enabling the IP remote function

Select the [NETWORK] menu

[IP REMOTE]

[ENABLE/DISABLE]

[ENABLE].

Icon

Description of operation

[A-a]

Switches between upper case and lower case. (Displayed during the text entry mode)

[@-#]

Switches the type of the symbols. (Displayed during the symbol entry mode)

[

]

Returns to the previous screen. Entered character is not reflected.

Switches the character to symbol/number.

Enters space (blank).

[BS]

Deletes the character. Previous character is deleted when the cursor position is empty.

Moves the cursor to right or left.

[Enter]

Completes the character entry.

Summary of Contents for HC-X2


























































































































































































































































































































Search results

Summary of Contents for HC-X2

Reviews:

Related manuals for HC-X2

Brands by name

Popular brands

Panasonic HC-X2, Operating Instructions Manual

Search results

Summary of Contents for HC-X2

Reviews:

Related manuals for HC-X2

Brands by name

Popular brands