Panasonic HC-X2 Operating Instructions Manual Download

Page: 189 / 313

Special recording function – Variable frame rate (VFR) recording function/super slow recording function

189

Variable frame rate (VFR) recording function/super slow recording
function

It is possible to acquire smooth slow motion or quick motion video by shooting with a different frame rate from the
frame rate to play back.

≥

Variable frame rate (VFR): 189

≥

Super slow recording function: 191

Variable frame rate (VFR)

Allows the high-speed shooting from 2 fps to maximum of 60 fps.

Setting by selecting the menu

In the [SYSTEM] menu

[FREQUENCY]/[FILE FORMAT]/[REC FORMAT], select the

resolution and codec for recording video and the frequency for the reference frame
rate.

The range of the frame rate that can perform high-speed shooting differs depending on the setting.

•

For the combinations that can be set (

Recording formats that can be set in variable frame rate recording: 190

)

Select the [SCENE FILE] menu

[VFR]

[ON].

•

This can also be set even with the USER button. (

Assigning functions to the USER buttons: 65

)

Set the frame rate in accordance with the shooting condition in the [SCENE FILE]
menu

[FRAME RATE].

Press the REC button.

Variable frame rate recording is started.

Setting with the multidial

In the [SYSTEM] menu

[FREQUENCY]/[FILE FORMAT]/[REC FORMAT], select the

resolution and codec for recording video and the frequency for the reference frame
rate.

Select the [SCENE FILE] menu

[VFR]

[ON].

Turn the multidial to display [ FRAME RATE].

Press the multidial.

The frame rate display is highlighted in orange.

Turn the multidial to select the frame rate.

Press the multidial.

The setting changes to the value displayed and exits.
Press the <EXIT> button to exit without changing the setting.

Press the REC button.

Variable frame rate recording is started.

Summary of Contents for HC-X2


























































































































































































































































































































Search results

Summary of Contents for HC-X2

Reviews:

Related manuals for HC-X2

Brands by name

Popular brands

Panasonic HC-X2, Operating Instructions Manual

Search results

Summary of Contents for HC-X2

Reviews:

Related manuals for HC-X2

Brands by name

Popular brands