1. Setting Values of menu.
2. Clear the time and date setting.
3. Initialize the Zoom position. (set to wide-angle end)
The shipment setting position of switches and lever:
(After the factory settings, set the switches and lever as following table.)
Name
Setting position
Lens cover open/close lever
Close
ND filter switch
[ Off ] position
FOCUS ASSIST button
[ A ] position
Power switch
[ Off ] position
INPUT1
[ LINE ] position
INPUT2
[ LINE ] position
SUB S/S COVER
Close
CH1 SELECT
[ INT (L) ] position
CH2 SELECT
[ INT (R) ] position
Eyepiece corrector lever
[ Shortsighted End ] position (Grip Side)
AUDIO LEVEL CH1/AUDIO LEVEL CH2 knobs Center position
Auto/Manual switch
[ AUTO ] position
Page 2 of 2
10/28/2017
file://\\royalfs\Service\Technical\Ms.dehghani\All SVC sent by CD\20\HC-X1EALLSVC...