- 109 -
3
(When [Microphone Gain] is selected in Step 2)
Select an item.
(When [Frequency Response] is selected in Step 2)
Touch
/
to adjust.
≥
Before recording, check the effect you have selected with a headphone set, etc.
≥
The high frequency range (dB) and low frequency range (dB) can be adjusted.
≥
If noises such as the sound caused by the wind bother you, set the low frequency range to
[LowCut].
≥
To end the adjustment, touch [EXIT].
(When [Directional] is selected in Step 2)
Select an item.
4
Touch [EXIT].
≥
appears on the screen.
≥
Depending on the recording condition or sound quality, the desired effect may not be achieved.
≥
The setting becomes [Auto] when you have connected an external microphone or audio device
*
.
* You can connect audio equipment when using the
series/
series.
≥
(When [Music] or [Festival] is set)
The volume of the recorded sounds may be lower than that of the sounds recorded with [Auto].
≥
(When [Speech] or [Nature] is set)
Sounds recorded with these effects are less realistic than those recorded with [SURROUND] or
[STEREO MIC] in [MIC SETUP].
You can switch the channel number setting of the built-in microphone.
≥
Set [REC FORMAT] to [AVCHD]. (
≥
[2ch] will be selected in the following cases:
j
When [REC FORMAT] is set to a setting other than [AVCHD]
j
When you have connected an external microphone or audio device
*
* You can connect audio equipment when using the
series/
series.
[Normal]:
Adjusts the sound quality automatically.
[Attenuate]:
Records sounds of very loud scenes at appropriate volume.
[SURROUND]/[STEREO]:
Records sounds with the setting of [MIC SETUP] ([SURROUND] or
[STEREO MIC]).
[MONO]:
Records sounds from all directions without setting specific
directivity.
[5.1ch/2ch]
: [RECORD SETUP]
#
[5.1ch/2ch]
#
desired setting
[5.1ch]:
Records with the 5.1ch.
[2ch]:
Records with the 2ch.
WXF1
VXF1
MENU
WXF1
VXF1
HC-WXF1-VXF1-VX1-V800EBEP-DVQP1585_eng.book 109 ページ 2018年2月22日 木曜日 午後12時30分