Panasonic HC-W850 Owner'S Manual Download

Page: 146 / 220

- 146 -

∫

If the device is Android (NFC-compatible)

≥

Set the NFC function of the smartphone to ON.

Start up the smartphone application “Image App”.

≥

When a Wi-Fi connection guidance screen is displayed, select [NO].

Display the screen of a connection setup to home monitor from the menu of a
smartphone.

Touch the smartphone on

of this unit.

≥

If the unit is not recognized even when touching the
smartphone, change positions and try again.

≥

A confirmation screen is displayed on the screen of a
smartphone. Touch [YES] to start home monitor.

≥

This unit will be turned on if it is touched on the

by a

smartphone even when this unit was turned off using the LCD
screen.

∫

If the device is Android (non-NFC-compatible) or iOS

Press Wi-Fi button and touch [Home Cam].

Start up the smartphone application “Image App”.

≥

When a Wi-Fi connection guidance screen is displayed, select [NO].

≥

Use the smartphone to start home monitor.

To exit [Home Cam]:

Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.

≥

After turning off this unit with the LCD monitor, you can also turn on this unit and start the NFC

communication by touching the smartphone on

of this unit. (If you have turned off this unit

with the power button, this unit will not turn on by touching the smartphone on

of this unit)

≥

You can register up to five smartphones. When the number exceeds five, registrations will be
deleted, starting from the oldest touched one.

≥

Please refer the instructions for the device you are using for information on how to set up and use
a NFC-compatible smartphone.

When using the home monitor function for the second time or later

Summary of Contents for HC-W850





























































































































































































































Search results

Summary of Contents for HC-W850

Reviews:

Related manuals for HC-W850

Brands by name

Popular brands

Panasonic HC-W850, Owner'S Manual

Search results

Summary of Contents for HC-W850

Reviews:

Related manuals for HC-W850

Brands by name

Popular brands