Power ON self check result display
Function to diagnose correct function of the device and interface between devices result display.
Display the following communication test result.
Power IC : Communication test between IC3401 and IC1503.
Main IC : DDR. Communication test inside IC3401.
WiFi IC : Communication test between IC3401 and Wi-Fi P.C.B..
NFC IC : -- (Excluded).
Display other than “OK” are abnomalities of each lines.
PanTilter : Error display of the Remote Pan Tilt Cradle (VW-CTR1)
(When not connected the remote pan tilt cradle, display “--”.)
When error is occurred, display “NG” with the error code.
End method of operation
Touch the [ BAK ] of LCD to exit the power on self check result display, and the POWER OFF.
6.4 Adjustment function for the Service
Touch the [14] of LCD, select the adjustment function for the service.
Operation Specifications (until before the start of the adjustment)
Function description
The service adjustment do setup and adjustment of the following items required in the field service.
For a detailed content, such as the adjustment procedure, refer to “9 Measurements and Adjustments”.
Model setting
Setting of the file name for adjustment data backup to SD card.
Execution of adjustment data backup to SD card
Checking of Switches
Camera adjustment
Zoom Tracking adjustments
Indoor White Balance Adjustment
Outdoor White Balance Adjustment
Level shot adjustment
End method of operation
Press the power button to turn the unit off.
6.5 Restore the backed up adjustment data
Error Code
Description
NG 01 Battery undercut
NG 04 The start-up state of the update error factor
NG 10 The failure of Tilt motor
NG 80 USB Communication Error
Page 4 of 6
10/28/2017
file://\\royalfs\Service\Technical\Ms.dehghani\All SVC sent by CD\20\HC-VX980EGAL...
