- 126 -
≥
The Eye-Fi menu only appears when an Eye-Fi card is used.
≥
The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to
changes to the card specification etc.
≥
Update the firmware of the Eye-Fi card to the latest one using the software supplied with the Eye-
Fi card before use.
≥
When the endless memory function of the Eye-Fi card is set to on, the files transferred from the
card may be deleted automatically.
≥
The Eye-Fi card may heat up as a result of the files being transferred. Note that the use of an
Eye-Fi card accelerates the battery drain, so we recommend you use the card in Playback Mode.
≥
The Eye-Fi setting can be checked while pausing the recording.
≥
If the Eye-Fi card is removed and then reinserted into the unit, set functions related to Eye-Fi
again from the menu.
≥
When using the Eye-Fi card, please be sure to unlock the write-protect switch. (
≥
Before deleting the files, please confirm they have been transferred to your PC and uploaded to
the sharing site.
≥
Do not use the Eye-Fi card in locations where the use of wireless devices is forbidden, such as
inside aircraft etc.
≥
Depending on network conditions, the transfer may take some time. Also, if network conditions
deteriorate, the transfer may be suspended.
≥
Files over 2 GB in size cannot be transferred. Such files should first be split to reduce the file size.
(
[Eye-Fi TRANSFER] is set to [ON]
(Transferring in Eye-Fi direct mode)
[Eye-Fi TRANSFER] is set to [ON]
[Eye-Fi TRANSFER] is set to [OFF]