Panasonic HC-V760 Operating Instructions Manual Download

Page: 68 / 257

- 68 -

Manual Focus adjustment

If auto focusing is difficult due to the conditions, then use Manual Focus.

≥

Switch to Manual Mode. (

)

≥

For information on how to set items with the Multi Manual Dial, refer to page

(When MF assist function is used)

Select the menu.

≥

Touch

to display the Manual icon.

Touch [FOCUS].

Touch [MF] to change to Manual Focus.

≥

MF appears on the screen.

Adjust the focus by rotating the Multi Manual
Dial.

The in-focus area is displayed in blue. The normal screen
returns approximately 2 seconds after you finish bringing the
subject into focus.

≥

When [MF ASSIST] is [OFF], the blue area is not
displayed.

≥

To restore Auto Focus, touch [AF] in Step 3 or change the
Recording Mode to the Intelligent Auto Mode. (

)

≥

The blue display does not appear on the images actually recorded.

: [RECORD SETUP]

[MF ASSIST]

[ON]

Rotate the Multi Manual Dial to
set focus.

MENU

MNL

Part displayed in blue

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands