Panasonic HC-V760 Operating Instructions Manual Download | Manualshive

Page: 102 / 257

background image

- 102 -

Highlight Playback

Part that was recognised as clearly recorded is extracted from multiple scenes, and it can be played
back or stored in a short time with effects and music added.
It is also possible to create an original Highlight Playback by checking your favourite scenes and
setting up to extract those scenes.

1

Touch

. (

2

(When [ALL MP4/iFrame] is selected)

Touch the recording format of the scene to be
played back.

*1

series/

series only

3

Touch the desired effect.

≥

The scenes matching the effect will be extracted and displayed in the thumbnail view.

≥

Effects such as fade, slow-motion, still (pause), or digest playback are inserted.

≥

The date at playback is the date that was last recorded in an extracted scene.

≥

To change the settings, refer to page

.

4

Touch

in the thumbnail view.

5

Select the playback operation. (

)

≥

When the playback is finished or stopped, the screen to select [REPLAY], [SAVE] (

[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.

≥

Skip Playback, Slow-motion Playback, Frame-by-frame Playback and Direct Playback are not
possible.

≥

Highlight Playback is not available for the following scenes :

s

iFrame scenes

s

Scenes recorded with Creative Control (

), HDR Movie Mode (

) and FULL HD

Slow Motion Video Mode (

s

series/

series/

series

Scenes recorded as Backup for Twin Camera

s

Highlight Playback scenes saved in MP4 format

[1080/50p]/[1080/25p]

*1

/[720/25p]/[360/25p]

*1

ALL

WX970

VX870

[POP]:

Recommended for party scene.

[NATURAL]:

Recommended for scenery.

[CLASSICAL]:

Recommended for slow moving scene.

[DYNAMIC]:

Recommended for fast moving scene such as sports scene.

[CUSTOM]:

Set the combination of the effect and the music. (

WX970

VX870

V770

«
...
100
101
102
103
104
...
»

Summary of Contents for HC-V760


































































































































































































































































Reviews:

No comments

Related manuals for HC-V760

Brand: Canon Pages: 4

Brand: Vivitar Pages: 54

Brand: Panasonic Pages: 119

Brand: Panasonic Pages: 120

Brand: Panasonic Pages: 112

Brand: Philips Pages: 3

Brand: Philips Pages: 19

128MB-DIGITAL CAMCORDER KEY019

Brand: Philips Pages: 26

Brand: Philips Pages: 34

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brand: Philips Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands