Panasonic HC-V760 Operating Instructions Manual Download

Page: 30 / 257

- 30 -

≥

When [MP4/iFrame] is selected

≥

The recording mode icon

is displayed in the thumbnail display when the item is touched.

(

(Red),

(Red)

and

)

≥

The following icons are displayed on thumbnails when [ALL AVCHD] or [1080/50i] is touched:

≥

The following icons are displayed on thumbnails when [ALL MP4/iFrame] is touched:

≥

is displayed on the thumbnails of MP4 [1080/50M] scenes when [1080/50p] in [MP4/iFrame]

is touched.

Touch the scene or the still picture to be played back.

≥

To display the next (previous) page:

Slide the thumbnail display upward (downward) while touching it.

Switch the touch menu, and then touch

(up) /

(down) on the thumbnail scroll

lever.

Select the playback operation by touching
the operation icon.

≥

Operation icons and screen display will disappear when
no touch operation is performed for a specific period of
time. To display them again, touch the screen.

* When touched two times, the fast rewind/fast forward speed increases. (The screen display

changes to

[ALL MP4/iFrame]/[1080/50p]/[1080/25p]/[720/25p]/[360/25p]/[iFrame]

AVCHD [1080/50p] scene:

AVCHD [PH] scene:

AVCHD [HA] scene:

AVCHD [HG] scene:

AVCHD [HE] scene:

MP4 [1080/50p] scene:

(Blue) (Recording mode [1080/50M])
(Recording mode [1080/28M])

MP4 [1080/25p] scene:

MP4 [720/25p] scene:

MP4 [360/25p] scene:

iFrame scene:

50p

0h01m30s

Operation icon

Motion picture playback

Still picture playback

;

Playback/Pause

Fast rewind playback

Fast forward playback

∫

Stops the playback and shows the
thumbnails.

;

Slide show (playback of the still
pictures in numerical order) start/
pause.

Plays back the previous picture.

Plays back the next picture.

∫

Stops the playback and shows the
thumbnails.

Summary of Contents for HC-V760


































































































































































































































































Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands

Panasonic HC-V760, Operating Instructions Manual

Search results

Summary of Contents for HC-V760

Reviews:

Related manuals for HC-V760

Brands by name

Popular brands