15
VQT3W41
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1
Select the menu. (
l
20)
2
Touch the date or time to be set, then set the desired value using
/
.
A
Displaying the World time setting:
[HOME]/
[DESTINATION]
≥
The year can be set between 2000 and 2039.
≥
The 24-hour system is used to display the time.
3
Touch [ENTER].
≥
A message prompting for World Time setting may be
displayed. Perform the World Time setting by touching the screen.
≥
Touch [EXIT] to complete the setting.
≥
The date and time function is driven by a built-in lithium battery.
≥
If the time display becomes [- -], the built-in lithium battery needs to be charged.
To
recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this
unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and
time for approx. 4 months. (The battery is still being recharged even if the unit is off.)
Preparation
Setting date and time
: [SETUP]
#
[CLOCK SET]
For Australia and New Zealand
WARNING
THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED BY QUALIFIED
PERSONNEL. IF THIS IS NECESSARY, CONTACT THE PANASONIC CUSTOMER CARE
CENTRE ON 132600 FOR YOUR NEAREST AUTHORIZED SERVICE CENTRE.
MENU
HC-V500&V500M-GA-VQT3W41_mst.book 15 ページ ２０１２年１月１０日 火曜日 午後８時３分
