Panasonic HC-V270, Operating Instructions Manual

Page: 129 / 195

- 129 -
Connecting this unit to a DLNA-compatible TV via Wi-Fi, you can play back scenes and still pictures
on the TV.
A
DLNA-compatible TV
Preparations before using [DLNA Play]
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Check if the TV is DLNA-compatible.
3 Set up a Wi-Fi connection between this unit and the wireless access point.
≥
[Easy Connection (WPS)] ( l 145 )
≥ Searching for wireless access points to set up a connection ( l 146 )
≥
Setting up a connection manually ( l 147 )
When the Wi-Fi connection is complete, proceed to “Playing back on a TV”.
≥
Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (
l 143 )
Playing back on a TV
You can play back the scenes and still pictures recorded with or stored in this unit on a TV.
≥ The following scenes can be played back:
j
Scenes recorded in AVCHD [HG]/[HE]
j Scenes recorded in MP4/iFrame [720]
j
Scenes saved in MP4 (1280
k
720/25p) or MP4 (640
k
360/25p)
1
Press Wi-Fi button on this unit and touch [DLNA Play].
≥ If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
≥ If you touch [CANCEL], the Wi-Fi connection is cancelled.
≥
When the connection is complete, the screen of this unit turns off. To display it again, touch the
screen.
Wi-Fi [V270]
[DLNA Play]
≥ Please read the operating instructions for the TV about connecting TV to the wireless
access point.
≥ Do not remove the SD card in playing back on a TV.