background image

- 85 -

¬

Press the recording/playback button to switch this unit to the Playback Mode.

To delete the scene or still picture being played back

Touch 

 while scenes or still pictures to be deleted 

are being played back.

To delete scenes or still pictures from the 
thumbnail display

Switch to the thumbnail display of the scenes or still pictures to delete. (

l

24

)

1

Touch 

. (

l

17

)

When the thumbnail display is 1 scene display or Highlight & 
Time Frame Index, the scene or still picture being displayed is 
deleted.

2

Touch [ALL SCENES], [MULTI] or [SINGLE].

All the scenes or still pictures displayed as thumbnails will be 
deleted by selecting [ALL SCENES].
(In case of playing back scenes or still pictures by date, all the 
scenes or still pictures on the selected date will be deleted.)

Protected scenes/still pictures cannot be deleted.

3

(When [MULTI] is selected in Step 2)

Touch the scene/still picture to be deleted.

When touched, the scene/still picture is selected and the 

 indication appears on the thumbnail. 

Touch the scene/still picture again to cancel the operation.

Up to 99 scenes can be selected to be deleted.

(When [SINGLE] is selected in Step 2)

Touch the scene/still picture to be deleted.

4

(When [MULTI] is selected in Step 2)

Touch [Delete].

To continuously delete other scenes/still pictures, repeat Steps 3-4.

When you stop deleting halfway:

Touch [CANCEL] while deleting.

The scenes or still pictures that have already been deleted when the deletion is cancelled cannot be restored.

To complete editing:

Touch [Return].

Advanced (Playback)

Deleting scenes/still pictures

Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of 
the contents before proceeding with deletion.

0h01m30s

0h01m30s

0h01m30s

Summary of Contents for HC-V180














































































































































Reviews: