16
VQT4T56
The unit can record still pictures or motion pictures to an SD card or built-in memory. To record to an
SD card, read the following.
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating for motion
picture recording.
≥
Keep the Memory Card out of reach of children to prevent swallowing.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment, for the first
time on this unit, format the SD card. (
l
23) When the SD card is formatted, all of the recorded data
is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
Preparation
Recording to a card
Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC
Memory Cards that can be used for motion picture recording on the following website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
1
Open the SD card cover and insert (remove) the SD card into (from) the
card slot
B
.
≥
Face the label side
C
in the direction shown in the illustration and press it straight in as far as
it will go.
≥
Press the centre of the SD card and then pull it straight out.
2
Securely close the SD card cover.
≥
Securely close it until it clicks.
Access lamp
[ACCESS]
A
≥
When this unit is accessing
the SD card or built-in
memory, the access lamp
lights up.
HC-V210&V210M&V110_EP_VQT4T56_mst.book 16 ページ ２０１３年１月１５日 火曜日 午前１０時４０分
