background image

122

VQT3Y04

Others

Limited Warranty 

(ONLY FOR U.S.A. AND PUERTO RICO)

Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Camcorder Products

Limited Warranty

Limited Warranty Coverage (For USA and Puerto Rico Only) 

If your product does not work properly because of a defect in materials or workmanship, 
Panasonic Consumer Marketing Company of North America (referred to as “the warrantor”) will, 
for the length of the period indicated on the chart below, which starts with the date of original 
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, 
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. 
The decision to repair, replace or refund will be made by the warrantor. 

During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty 
period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for 
non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies 
to products purchased and serviced in the United States or Puerto Rico. This warranty is
extended only to the original purchaser of a new product which was not sold “as is”. 

Carry-In or Mail-In Service

To find a service center please visit http://www.panasonic.com/help or call 1-800-211-PANA 
(7262).

When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s 
Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping 
Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as 
Panasonic is committed to providing the most up to date information. Include a letter detailing the 
complaint, a return address and provide a daytime phone number where you can be reached. 
A valid registered receipt is required under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE 
REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE 
OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE 
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF 
PURCHASE.

Limited Warranty Limits And Exclusions

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES 
NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT 
COVER damages which occurred in shipment, or failures which are caused by products not 
supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, 
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of 
consumer controls, improper maintenance, power line surge, lightning damage, modification, 
introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or 
other business or rental use of the product, or service by anyone other than a Factory Service 
Center or other Authorized Servicer, or damage that is attributable to acts of God.

Product or Part Name 

Parts 

Labor 

 

s

y

a

d

 

0

9

 

r

a

e

y

 

1

 

r

e

d

r

o

c

m

a

C

SD Memory Cards, Rechargeable Batteries 
(defective exchange)

90 days

Not Applicable 

HC-V100&V100MP_PC_PU_VQT3Y04_mst.book  122 ページ  2012年1月5日 木曜日 午前10時20分

Summary of Contents for HC-V100K





































































































































Reviews: