8
6 Disassembly and Assembly Instructions
6.1.
Outline
Please be disassembly and assembly with reference to the flow chart and illustrations drawings.
Important:
1. It is recommended dealing with Clean Box, to keep maintaining the dustproof environment.
(Refef to "
5.2. Clean Box
" section of this Service Manual for details.)
2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front &
rear), other than necessary cases.
3. Do not touch the surface of the lens glasses with your fingers.
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
NOTE:
1. When installing the screws, be sure to use the torque driver (RFKZ0456) and tighten the screws with specified torque, men-
tioned on the following.
6.2.
Disassembly Flow Chart
Caution
Keep covering the lens unit with Lens caps (front & rear), other than necessary cases.
