5
VQT1U88
∫
Lens Care
≥
Sand and dust can damage the lens. Make
sure that no sand or dust gets inside the lens
or the terminals when using the lens on a
beach, etc.
≥
This lens is not waterproof. If drops of water
get onto the lens, wipe the lens with a dry
cloth.
≥
Do not press the lens with excessive force.
≥
When there is dirt (water, oil, and fingerprints, etc.)
on the surface of the lens, the picture may be
affected. Lightly wipe the surface of the lens with a
soft, dry cloth before and after taking pictures.
≥
Do not place the lens mount facing downwards.
Do not allow the lens contact point
1
to become
dirty.
∫
About Condensation (Fogging of the
Lens)
≥
Condensation occurs when there are differences
in temperature and humidity as described below.
Condensation can cause the lens to become dirty
and lead to mold and malfunctioning, so exercise
caution in the following situations:
– When the camera is brought indoors from outside
during cold weather
– When the camera is brought into an air-
conditioned car
– When cold air from an air conditioner is directly
blown onto the lens
– In humid places
≥
Put the camera into a plastic bag to allow it to
acclimate to the surrounding temperature in order
to prevent condensation. If condensation occurs,
turn the power off and leave it for about two hours.
Once the camera acclimates to the surrounding
temperature the condensation will go away
naturally.
Precautions
VQT1U88_ENG_SPA.book 5 ページ ２００８年８月２７日 水曜日 午前１０時２０分
