background image

Ć

)<('=/

Ć

filter is different 
owing to model 
difference

)<('=

FEATURES

Thanks to efficient recovery of the thermal energy lost during ventilation (fresh air 
load), you can save an air-conditioning fee.
Thanks to a greatly reduction of fresh air load, part of the thermal energy is recovered 
so that the air-conditioning can become mini-type properly.
When cooling, reduce the outdoor air humidity to make the incoming air humidity 
close to the indoor humidity;
When heating,raise the outdoor air humidity to make the incoming air humidity close 
to the indoor humidity.
Indoor temperature fluctuation is small when ventilating. As the simultaneous 
performance of exhaust air and supplyair, it can be ventilated in high density space.
The air duct and heat exchange core has the effect of sound isolation. It prevents the 
outdoor noise from coming in, reversely it also works so as to keep a nice office and 
store environment.

1. Energy saving ventilation

2. Facility saving

3. Humidity function

4. Comfortable ventilation

5. Sound isolation 

USING CAUTIONS

It must operate with filter.
If not using the filter, heat exchange 
core is clogged with dirt and dust, 
performance will be lowered and 
even the unit doesn’t work.

Turn on /off the switch correctly.
If repeatedly turning on or off the 
switch not only cause the wrong 
operation but affects the relay 
inside and damage it.

It’s forbidden to use the

Ę

normal

ventilation

ę

for the dew will be 

produced in unit and indoor air inlet 
if operating the mode

Ę

normal

ventilation

ę

when the room is 

heated in winter.

Part name and using methods(model label adhesive location).

Operation Instruction

winter

Normal ventilation

Part Name

indoor filter

side maintenance 

cover

heat exchange 

core

switch box

switch box

model

heat

exchange core

model label

indoor filter

indoor filter

indoor filter

outdoor filter

down maintenance cover

down maintenance cover

(left type)

side maintenance

 cover

outdoor filter

filter is different owing 

to model difference

outdoor filter

down maintenance cover

down maintenance cover

indoor filter

(right type)

The amount of indoor filter is different 
owing to model difference.

2 left type is symmetric to right type.

 Model

Quantity

Other model

Summary of Contents for FY-E15DZ1





















Reviews: