Panasonic FV-KTB2T61HK, Operation/Installation Instructions Peration/Installation Instructions

Page: 8 / 28

Troubleshooting of common faults Troubleshooting of common faults
Electrical schematic diagram Electrical schematic diagram
Symptom Possible causes Solutions
The light is not lit
and the motor does
not work 1.The power plug is not inserted into the
power socket.
2.The product wire fails.
1.Insert it into the power socket.
2.Contact the Customer Consulting Service
Center.
The motor does not
work
The motor or capacitor fails.
Contact the Customer Consulting Service
Center.
The light is not lit
1.The light wire or connection fails.
2.The light circuit board fails.
3.The light lamp fails.
Contact the Customer Consulting Service
Center.
Abnormal noise
The smoke duct is loose or excessively
bent, causing poor air fl ow. Contact the Customer Consulting Service
Center for reinstalling of the smoke duct.
Oil fume absorption
is not effective
1.The smoke duct is loose or excessively
bent, causing poor air fl ow.
2.The range hood is not set at the highest
fan speed.
3.Oil fume is blown off or blown away due
to high air volume in the kitchen.
4.The distance between the cooking stove
and the range hood is too far.
1.Contact the Customer Consulting Service
Center for reinstalling of the smoke duct.
2.Set to the highest fan speed.
3.Keep the windows or door closed in a
proper way.
4.Reinstall the range hood with reduced
distance from cooking stove.
Oil leakage
1.The installation position of range hood is
inclined, which makes it impossible for
the oil to fl ow into the oil cup.
2.The oil cup is full.
1.Contact the Customer Consulting Service
Center for reinstalling of it.
2.Pour out the oil and clean the oil cup.
An abnormal sound
is heard when the
fan rotor works
The fan rotor is loose, and the fan rotor
cap is not tightened. Contact the Customer Consulting Service
Center.
Touch buttons do
not work properly
The control switch fails.
Contact the Customer Consulting Service
Center.
In case that any fault occurs, check it according to the table below. If the problem still exists, contact
the Customer Consulting Service Center.
Brown
Blue
Green
Brown
Orange
White
Yellow
Red
Black
Red+
Black-
Light lamp 1.5 W
×
2
Yellow and green
450 V
8
μ
F
Motor
L
N
220 V
50 Hz
Computer switch board
Computer board
8