Panasonic FV-KTB2SD1HK, Installation Instructions Manual

Page: 3 / 14

Safety precautions Safety precautions
(continued) (continued)
Please make sure to Please make sure to
follow these instructions ! follow these instructions !

Be sure to use a 10 A, 220 V AC power socket separately. Be sure to use a 10 A, 220 V AC power socket separately.
(So as not to cause fi res.)

Be sure to remove the power plug before cleaning the product. Be sure to remove the power plug before cleaning the product.
(So as not to cause electric shocks.)

There is a fi re risk if cleaning is not carried out in accordance with the instructions, the details There is a fi re risk if cleaning is not carried out in accordance with the instructions, the details
concerning the method and frequency of cleaning, please see the instructions.
concerning the method and frequency of cleaning, please see the instructions.
(If the range hood is not cleaned and maintained according to the instructions specifi ed in the
manual, it may catch fi re.)

When inserting or removing the power, hold the power plug itself instead of pulling the supply When inserting or removing the power, hold the power plug itself instead of pulling the supply
cord as you like.
cord as you like.
(So as not to cause fi res or electric shocks.)

There shall be adequate ventilation of the room when the range hood is used at the same time There shall be adequate ventilation of the room when the range hood is used at the same time
as appliances burning gas or other fuels.
as appliances burning gas or other fuels.
(So as not to cause intoxication.)

Stop using this product immediately when oil catches fi re during cooking. Stop using this product immediately when oil catches fi re during cooking.
(So as not to cause fi res.)

Stop using this product, and turn off the power switch or remove the power plug in case of any Stop using this product, and turn off the power switch or remove the power plug in case of any
anomaly/malfunction.
anomaly/malfunction.
(So as not to cause fi res or electric shocks.)
Examples of abnormal failures:
• Abnormal noise or heat.
• An unusual smell/smoke emitted.
• Burning.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
similarly qualifi ed persons.
similarly qualifi ed persons.
(So as not to cause electric shocks or hazard.)

This appliance is not intended for use by persons (including children) with reduced physical, This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for their
given supervision or instruction concerning use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do not play with the appliance.
safety. Children should be supervised to ensure that they do not play with the appliance.
(So as not to cause burns, injuries or electric shocks.)

This product shall be installed by professionals, and it shall be installed fi rmly and horizontally. This product shall be installed by professionals, and it shall be installed fi rmly and horizontally.
(So as not to cause injury due to falling of the product.)

Be careful when removing the unit to prevent it from dropping or falling accidentally. Be careful when removing the unit to prevent it from dropping or falling accidentally.
(So as not to cause injury due to falling of the product.)

It shall be grounded. Connect the power plug to a power socket with a grounding continuity It shall be grounded. Connect the power plug to a power socket with a grounding continuity
terminal.
terminal.
(So as not to cause electric shocks in case of malfunction or leakage.)

Be sure to install this product on the wall, and make sure that the metal parts and mounting Be sure to install this product on the wall, and make sure that the metal parts and mounting
screws do not touch any metalwork in the wall, such as metal slats, cable slats and metal plates.
screws do not touch any metalwork in the wall, such as metal slats, cable slats and metal plates.
(So as not to cause electric shocks.)
3