17
ENGLISH
V6
2 - Ø4.5x40
P
P
P
P
M
V5
2 - Ø4x7
V4
8 - Ø3.9x9.5
V5
2 - Ø4x7
M
N
(2)
(5)
(6)
(3)
(4)
(1)
F
Phase 5
(Fig. F)
(1)
Insert the extension (M) into the chimney (N).
(2)
Fasten the chimney (N) to the Range Hood body using the screws (V4 Ø3.9x9.5).
(3)
Slide the extension (M) until it reaches the desired height.
(4)
Remove 2 screws (V5 Ø4x7) from the bracket (P).
Place the bracket (P) on the wall, verify the horizontal alignment with a spirit level and mark 2 screw positions at the ends.
(5)
Fasten the bracket (P) with the 2 relative screws (V6 Ø4.5x40).
(6)
Screw the extension (M) to the bracket (P) using the 2 screws (V5 Ø4x7).
- Power the Range Hood complying with the regulations in force.
