Fig. 19
IMPORTANT:
INSTALLATION
WALL INSTALLATION-
VII
I
(
)
INSTALLATION
WALL INSTALLATION-
VII
I
(
)
1. Remove adaptor from fan body before starting installation.
(Fig. 19)
2. Insert the suspension bracket into the adaptor. (refer to
step 2 of installation
of page 6).
II
UP
When the product is installed on the wall, the adaptor shall be faced upward. (Fig. 18)
Prohibition
10
(2) Inspect duct work and wiring before proceeding with installation.
(3) Plan suitable location for ventilating fan. (next to ceiling joist)
(5) First, remove ceiling section according to Fig. 6 of page 6.
(6) Install ventilating fan.
(1) To install the ventilating fan, follow the procedures described in lnstallation
. Take the following
precautions before installation.
II
1. Installation in existing construction.
Installing the ventilating fan in an existing building requires an accessible area (attic or crawl space) above
the planned installation location or existing ducting and wiring.
CAUTION:
Check area above planning installation location to be sure that:
1. Duct work can be done and that area is sufficient for proper ventilation.
2. Wiring can be run to planned location.
3. No wiring or other obstructions shall interfere with installation.
INSTALLATION
IN EXISTING CONST UCTION
VI
(
R
)
INSTALLATION
IN EXISTING CONST UCTION
VI
(
R
)
(4) Before installation, provide inspection and maintenance access at a location that will not interfere
with installation work shown in installation .
II
(1) Inspect duct work and wiring before proceeding with installation.
(2) Remove ceiling section according to Fig. 6 of page 6.
(3) Install ventilating fan.
2. Installation from accessible area above fan location.
Fig. 18
Prohibition
Prohibition
