Panasonic FP Web-Server Hardware And Configuration Manual Download Page 77

Page: 77 / 195

HTTP client

FP Web-Server V2.810 EN

and many more....

HTTP POST:

The FP Web-Server sends a HTTP POST request to the HTTP server. The

HTTP server sends its response to the request to the FP Web-Server. If the

FP Web-Server receives a response, it will write the response to the PLC. If

no response is received, an error flag will be set.

Possible applications are for example:



Set PLC registers via Post requests



Send data to cloud server via Post



Set values to an external HTTP server

and many more....

11.2 Cloud client

The FP Web-Server2 can insert data into a cloud server.

1. Dexcell cloud server (http://www.dexmatech.com/):

Insert data to Dexcell cloud server:

Summary of Contents for FP Web-Server




































































































































































































Search results

Summary of Contents for FP Web-Server

Reviews:

Related manuals for FP Web-Server

Brands by name

Popular brands

Panasonic FP Web-Server, Hardware And Configuration Manual

Search results

Summary of Contents for FP Web-Server

Reviews:

Related manuals for FP Web-Server

Brands by name

Popular brands