133
Operation Manual
FT1020G3 Rev 2.10.4
25.7
Event Log (H4/U7)
Three event logs (3 x 999 events) are available:
•
Alarm log (alarm events, e.g. fire alarm, fire alarm reset, etc.)
•
Interlocking log (only interlocking events)
•
General event log (all other type of events)
The origin of the event, e.g.
CU00
(see below), may be originated from
EBLWin
,
EBLWeb
or
Ext#
(External system no. # connected via Web-server / gateway).
Action
Text in display
Comments
"Menu"
According to chapter
"Access", see page 42.
Scroll to menu H4.
H4 Present system status
"
↲
"
U1 Disablement
U2 Disablement by time channel
U3 Open doors
U4 Sensor values
U5 Sensors activating SERVICE signal
U6 Technical warning
U7 Event log
U8 Information
Scroll to menu U7.
U7 Event log
"
↲
"
Select event log:
Alarm log
Interlocking log
General event log
Use "▼" or "▲" to
select a log. (e.g. the
"Alarm log".)
"
↲
"
Command: Reset all alarms
19-02-2021 09:25:30 CU00
FIRE ALARM zone 123 address 45
19-02-2021 09:45:15 CU00
FIRE ALARM zone 123 address 46
19-02-2021 09:55:01 CU00
Event 15 to 13 of 21
If there are no events, --
List is empty-- will be
shown. The list is
dynamic in which you
can scroll with "▼" or
"▲". The most recent
event is on top of the
list.
"
ESC
"
U6 Event log
Scroll to another menu
or press "ESC".
Summary of Contents for Firetracker FT1020G3 CIE
Page 1: ...Operation Manual FT1020G3 Rev 2 10 4 For Software V2 10 4 FT1020G3 FDCIE MA430 March 2023...
Page 2: ...This page has deliberately been left blank...
Page 176: ...176 Operation Manual FT1020G3 Rev 2 10 4 Figure 24 FT1020G3 Standard Block Wiring Diagram...
Page 177: ...177 Operation Manual FT1020G3 Rev 2 10 4 Figure 25 FT1020G3 New 5012 PCB Layout...
