119
Operation Manual
FT1020G3 Rev 2.10.4
23.4
Alarm Devices (H2/B4)
All outputs of type "Alarm device" can be collectively disabled. Disabled output will stay in
(or return to) the normal condition for the output respectively.
Disabled outputs are listed in menu H4/U1.
Action
Text in display
Comments
"Menu"
According to chapter
"Access", see page 42.
Scroll to menu H2.
H2 Disable or re-enable
"
↲
"
B1 Zone or Zone/Address
B2 Output
B3 Output type
B4 Alarm devices
B5 Routing equipment
B6 Alert annunciation function
Escape
menu
Scroll to menu B4.
B4 Alarm devices
Via menu B4, outputs of
type "Alarm device" can
be collectively disabled
in a selected control unit
or all control units.
"
↲
"
Disable
All alarm devices
Press "
↲
" to disable,
which will be indicated
with "
√
" and a beep.
The "type" will be
automatically shown in
the Re-enable list
"
↲
"
Disable
All alarm devices
√
-- Re-enable list --------------------------------------------------
All alarm devices
Use the soft key "
|
" to
toggle between
Disable
and
Re-enable
list
.
"
|
"
Disable --------------------------------------------------------------
All alarm devices
Re-enable list
All alarm
devices
Press "
↲
" to re-enable.
Re-enabled type will
disappear from the list,
indicated with a beep.
Summary of Contents for Firetracker FT1020G3 CIE
Page 1: ...Operation Manual FT1020G3 Rev 2 10 4 For Software V2 10 4 FT1020G3 FDCIE MA430 March 2023...
Page 2: ...This page has deliberately been left blank...
Page 176: ...176 Operation Manual FT1020G3 Rev 2 10 4 Figure 24 FT1020G3 Standard Block Wiring Diagram...
Page 177: ...177 Operation Manual FT1020G3 Rev 2 10 4 Figure 25 FT1020G3 New 5012 PCB Layout...
