While the product is working, you can press button,
indicator lights on,
which can remove PM2.5 quickly. Until the indicator lights off
.
(At this moment the PM2.5 mode will stop, then product will switch to the
previous mode and continue.)
12
Remove PM2.5 quickly.
Press the button again to cancel.
( indicator lights off)
(Indicator
lights on)
PM2.5
OPERATION
You can adjust the brightness of indicators and Off / On.
While the product is working, if you press this button, all the indicators of
the control panel is dim out, and the clean sign lights off.
If you press this button again, all the indicators of the control panel is
light up and the clean sign lights back on.
When the product starts running, air volume indicator, nanoe
TM
X
indicator
and clean sign light on.
Notice
Brightness adjustment
PM2.5 button
再次按下此按钮取消。
( 指示灯熄灭)
使用方法
亮度调节
调节指示灯的亮度及关/开。
快速去除
PM2.5
。
产品运转时，按下按钮，控制面板上的所有指示灯变暗，空气污染度指示灯熄灭。
再按一下，控制面板上的所有指示灯变亮，空气污染度指示灯重新亮起。
提示事项
PM2.5
按钮
产品开始运转时，风量指示灯、
nanoe
TM
X
指示灯和空气污染度指示灯都处于亮起状态。
产品运转时，按下 按钮， 指示灯亮起。可快速去除
PM2.5
，直到 指示灯熄灭。
(此时
PM2.5
模式将停止，并跳转到之前的模式运转。)
(指示灯亮起)
