E
n
g
lis
h
► Cleaning the shaver
Use the self-cleaning recharger in temperatures between 15 °C
and 35 °C.
1
Insert the appliance plug into
the self-cleaning recharger.
2 Remove the protective cap and
then attach the shaver.
3 Plug in the AC adaptor into a
household outlet.
• Remove any soap or water on the shaver if it has been washed
with hand soap or any other detergent.
• Turn the shaver off before attaching.
• Check that the outer foil is not deformed or damaged when you
are attaching the shaver.
• Wipe off any water droplets on the main body rear terminal.
4 Press the SELECT button to select the course.
• The “Charge” course starts when attaching the shaver.
• Each time you press the SELECT button, the course changes
from “Clean/Dry/Charge” —> “Dry/Charge” -» “Charge”.
• The courses start approximately 6 seconds after they are
selected.
• The course will be aborted if the power is cut off. In this case,
perform the course again from the beginning.
• Do not detach the detergent cartridge or the water tank as the
cleaning liquid may spill causing a malfunction.
Course
Time required (guide)
О Charge
Charge
0 to 60 min
2
Clean/Dry/
Charge
If
Dry
Clean
Charge
„n
■
80 min
„ . „ „ a .
10 min
. ..
0 to 60 min
(170 min*)
►
W W
►
^3
• It is not possible to change the course after the
“Clean/Dry/Charge” course has started.
© Dry/Charge
ц
Dry
Charge
180 min
0 to 60 min
Ш Ш
^
• It is possible to change to the “Clean/Dry/
Charge” course even after the “ Dry/Charge”
course has started.
* When the ambient temperature of the self-cleaning recharger is
low (approx. 15 °C or lower), the time it takes to dry the shaver
increases.
• The Clean or Dry function may stop under extreme low
temperatures (approx. 0 °C or lower). In such a case, the CLEAN
and DRY lamps will blink when the “Clean/Dry/Charge” course is
selected, or the DRY lamp will blink when the “Dry/Charge”
course is selected.
E S-LF71_C IS .indb
8
Ж
2 0 1 1 /0 4 /2 2
1 5:0 5:
8
