-
20
-
EN
1.7 TOOL SETUPS BEFORE USE
Alignment
mark
Click
Red label
Center
Switch lock position
• The retainer ring (C-ring) is for temporary fixing. Be sure to use the pin and the rubber ring
to fix the socket.
• If you use a socket that is worn or deformed, an anvil of the retainer ring (C-ring) type may
not be inserted.
1
Hold the forward/reverse lever
in the center to keep it in a
switch lock position.
3
Aligning the alignment marks,
attach the battery pack.
Slide it until the red label is out of sight,
and make sure that it is fixed and won’t
come off.
2
Attach a socket.
①
Remove a rubber ring and a pin from
the socket.
②
Insert the socket into the tool.
(Align their hole positions.)
③
Reversing the procedure
①
, attach the
pin and the rubber ring.
• Be sure to put the rubber ring so that the
pin will not come out.
Rubber ring
Groove
Pin
EYFMH1WC_H2WC_WEB_EU.indb 16
EYFMH1WC_H2WC_WEB_EU.indb 16
2023/11/28 14:23:26
2023/11/28 14:23:26
