6
4 Disassembly and Assembly Instructions
* To reduce the risk of injury, always remove battery pack before removing/installing the tool.
* To assemble the tool, start with 4-4 and proceed to 4-1
4.1.
How to remove the Housing.
4.2.
How to remove the Driving assembly.
1. After removing the plate hook, remove 9 housing screws.
2. Then open the housing B.
3. Remove the interior parts.
4. Remove the interior components from the housing A.
Note: (when assembling)
Route LED lead wires and motor lead wire between the ribs on housing
A like the figure.
Hold the motor assembly, remove the fixation cover assembly and asso-
ciated parts together from the motor assembly.
