Panasonic EY7441, Service Manual, Page: 9 / 19

9
Ref. No. 3C Procedure 3A
→
3B
→
3C Removal of Switch and Driving block.
(Removal)
1. Take out the switch assembly.
2. Take out the driving block.
3. Separate the motor from the gear box block by twisting the motor
to unlock tabs.
Ref. No. 3D Procedure 3A
→
3B
→
3C
→
3D Removal or assembly of Control PCB.
(Removal)
1. Take out the connector from the control PCB.
NOTE:
Make sure hold the connector at the bottom area.
(Assembly)
1. Apply the grease around the tact switch.
2. Insert the connector.