Panasonic EY4542 - CIRCULAR SAW 14.4V, Service Manual

Page: 8 / 15

8
Ref. No. 2D Procedure 2A
→
2C
→
2D Removal of the gear box block.
1. Remove the off lock lever and the off lock spring.
2. Loosen 3 screws where securing the driving block with the hous-
ing in order to take out the gear box block from the main unit.
3. Press the shaft lock button and carefully remove the driving block
assembly.
4. Remove 5 screws and carefully open the gear box housing.
NOTE:
The internal parts of gear box block can be removed one after
another.
NOTE:
The lock button spring may pop out if it is not pushed in while
removing the driving block.