Panasonic EY3610, Service Manual

Page: 5 / 15

5
4 Trial Operation (After Checking Troubleshooting Guide)
4.1. Assembly
• Confirm if there is NO gap between Housing A and B by pinching the lead wires.
• There is no dust or deformation on battery terminals.
4.2. Operation
• Confirm if SWITCH turns ON and OFF normally.
• Confirm the smooth changing of HIGH and LOW handle and its changing mode.
• Confirm if caulking pressure is appropriate.
Place end of the rack guide on floor and turn on the switch leaning your body weight onto the unit instead of using sealing.
Check if the rack guide extends properly.
• Confirm if operation is normal attaching the sausage and cartridge attachment.
• There should be no abnormal sound of gears chafing, metallic sound and no abnormal vibration.
• There should be no metallic sound and abnormal sound when shaking up-down and right-left.
4.3. Adjustment of remaining amount scale
1. Turn on and extend the rack guide till the end.
2. Furthermore pull it by hand in the direction of arrow until it clicks.
3. Keep pushing the switch again until white part shows approx.1mm after red part appears.
4. Push the rack guide all the way back inside by hand.