background image

Safety and Legal Matters to Be Observed

 Please be advised that this product and product specifications are subject to change without notice for

improvement purposes. Therefore, please request and confirm the latest delivery specifications that explain 

the specifications in detail before the final design, or purchase or use of the product, regardless of the 

application. In addition, do not use this product in any way that deviates from the contents of the company's 

delivery specifications.

 

 Unless otherwise specified in this catalog or the delivery specifications, this product is intended for use in

general electronic equipment (AV products, home appliances, commercial equipment, office equipment, 

information and communication equipment, etc.).

When this product is used for the following special cases, please separately discuss the delivery specifications 

suited to each application with the company. These include applications requiring special quality and reliability, 

wherein their failures or malfunctions may directly threaten human life or cause harm to the human body 

(e.g.: space/aircraft equipment, transportation/traffic equipment, combustion equipment, medical equipment, 

disaster prevention/crime prevention equipment, safety equipment, etc.).

 

 Please ensure safety through protection circuits, redundant circuits, etc., in the customer's system design so

that a defect in our company's product will not endanger human life or cause other serious damage.

 This catalog shows the quality and performance of individual parts. The durability of parts varies depending on

the usage environment and conditions. Therefore, please ensure to evaluate and confirm the state of each part 

after it has been mounted in your product in the actual operating environment before use.

If you have any doubts about the safety of this product, then please notify us immediately, and be sure to conduct 

a technical review including the above protection circuits and redundant circuits at your company.

 The transportation of dangerous goods as designated by UN numbers, UN classifications, etc., does not apply

to this product. In addition, when exporting products, product specifications, and technical information described 

in this catalog, please comply with the laws and regulations of the countries to which the products are exported, 

especially those concerning security export control.

 Each model of this product complies with the RoHS Directive (Restriction of the use of hazardous substances in

electrical and electronic equipment) (2011/65/EU and (EU) 2015/863). The date of compliance with the RoHS 

Directive and REACH Regulation varies depending on the product model.

Further, if you are using product models in stock and are not sure whether or not they comply with the RoHS 

Directive or REACH Regulation, please contact us by selecting "Sales Inquiry" from the inquiry form.

 During the manufacturing process of this product and any of its components and materials to be used,

Panasonic does not intentionally use ozone-depleting substances stipulated in the Montreal Protocol and 

specific bromine-based flame retardants such as PBBs (Poly-Brominated Biphenyls) / PBDEs (Poly-Brominated 

Diphenyl Ethers). In addition, the materials used in this product are all listed as existing chemical substances 

based on the Act on the  Regulation of Manufacture and Evaluation of Chemical Substances.

 With regard to the disposal of this product, please confirm the disposal method in each country and region

where it is incorporated into your company's product and used.

 

 The technical information contained in this catalog is intended to show only typical operation and application

circuit examples of this product. This catalog does not guarantee that such information does not infringe upon 

the intellectual property rights of Panasonic or any third party, nor imply that the license of such rights has been 

granted.

Panasonic Industry will assume no liability whatsoever if the use of our company's 

products deviates from the contents of this catalog or does not comply with the 

precautions. Please be advised of these restrictions.

 

Laws / Regulations / Intellectual property

30-Jun-23

Safety and Legal Matters to Be Observed

 

Product specifications and applications

 

Safety design and product evaluation

Summary of Contents for EXC14CH







Reviews: