Panasonic EW-RAJ6, Operating Instructions Manual

Page: 14 / 30

Before entrusted repair
Please confirm the following.
After confirmation, if the abnormality remains, first unplug the AC adaptor from the
socket and then entrust to an authorized service center for inspection and repairs.
Before entrusted repair
The power
cannot be
switched on
Symptoms Symptoms Items to be confirmed Items to be confirmed
The massage
intensity is high
Toes do not feel
warmth
It stops halfway
The air cannot
enter
I feel warmth
dif ferently on
right and left
The massage
intensity is low
● Does the AC adaptor fall of f? (Page EN14, 16)
● Is the attachment wrapped tightly? (Page EN15, 17)
The air cannot
be discharged
completely
● Remove the attachment and unplug the air tube plug.
(Page EN22)
● Does the AC adaptor fall of f? (Page EN14, 16)
● Press the Power / Intensity selection key, Program selection
key and Warmth key and confirm. (Page EN20-EN21)
● Whether the Power / Intensity selection key is in the "Of f"
state? (Page EN20-EN21)
● Does the air tube plug fall of f? (Page EN15, 17)
● Whether the air tube for connection is folded?
● Is the attachment wrapped loosely? (Page EN15, 17)
● Are you putting the unit on thick socks?
● Does one air tube plug fall of f? (Page EN15, 17)
● Are your heels adjusted to the specified position? (Page EN15, 17)
● Does the air tube plug fall of f? (Page EN15, 17)
● Is the air tube plug inserted completely? (Page EN15, 17)
● Whether the air tube for connection is folded?
● The warmer (heater) warms in 5 minutes after turning on the
unit.
● Is the Warmth indicator (LED) on?
Pressing the Warmth key lights the Warmth indicator (LED).
(Page EN21)
● Are your heels adjusted to the specified position? (Page EN15, 17)
● Are you using the sole pads? (Page EN18)
● Are you putting the unit on thick socks?
Intensity indicator
(LED), Program
indicator (LED) or
Warmth indicator
(LED) does not go
on
It is damaged
The attachment
cloth is damaged
Manipulator or
AC adaptor is
overheating
These conditions are failures.
To prevent an accident, stop using immediately and contact
the dealer.
In case of abnormalities …
EN26 EN27