8 -
ENGLISH
Attaching and Detaching the Lens Fixing Attachment (continued)
Detaching the Lens Fixing Attachment
z
When removing the lens fixing attachment, remove it by performing the procedure of “Attaching the Lens Fixing
Attachment” (pages 7 to 8) in reverse.
z
When assembling and then storing the lens fixing attachment, assemble it by performing the procedure of “Pre
-
paring the Lens Fixing Attachment” (pages 5 to 6) in reverse.
5) Attach the lens fixing attachment bracket to
the lens fixing attachment mount bracket as
shown in the figure.
6) Fix the upper part of the lens fixing attach-
ment bracket in place using the thumbscrews
removed in step 1 of “Preparing the Lens Fix-
ing Attachment.”
7) Fix the lower part of the lens fixing attach-
ment bracket in place using thumbscrews (two
places).
8) Fix the center of the lens fixing attachment
bracket in place using thumbscrews (two
places).
9)
Loosen the thumbscrews (four places) of the
lens fixing bracket.
10) Push the lens fixing brackets up against the
lens and then fix them in place using thumb-
screws (four places).
Note
z
When the projector's active focus optimizer func-
tion is used, the function may not operate properly
if this product is attached. In such a case, take
care not to apply excessive force when pushing
the lens fixing brackets up against the projection
lens.
Thumbscrews
Thumbscrews
Thumbscrews
Thumbscrews
Thumbscrews
Summary of Contents for ET-PLF20
Page 11: ...ENGLISH 11 MEMO ...
