4 -
ENGLISH
Product description
This is a ceiling mount bracket for installing projectors.
■ Structural components
Parts name
Form (number of parts)
Applications
Attachment plate
× 1
The attachment plate is attached
to the ceiling via four ceiling
mount bolts.
Installation methods are different
for concrete and wooden ceilings.
It also allows horizontal swing
adjustment.
Projector mount
bracket
× 1
This is used to install the projector
itself.
It also includes a function for
adjusting the left/right tilt.
Adjustment pole
Adjustment pole 1
× 1
Adjustment pole 2
× 1
This is the adjustment pole
which is installed in between the
attachment plate and the projector
mount bracket.
It also includes a function for
adjusting the distance between
the ceiling and the projector itself.
Angle adjusting
bracket
× 1
This is attached to the projector
mount bracket.
It also allows vertical swing
adjustment.
Pole brace
× 1
This is attached to the attachment
plate to secure adjustment pole 1.
Pole base
× 1
This is attached to the adjustment
pole 2.
Screws and bolts
Hex nut (M6)
× 4
Flat washer (M6)
× 4
These are used to assemble the
bracket and mount it onto the
projector.
Hex head bolt, captive washer (M6×80)
× 4
Screw, captive
washer (M4×10)
× 4
Hex head bolt,
captive washer
(M6×16)
× 24
Ceiling mount
bracket drop
prevention kit
Prevents the the ceiling mount
bracket from falling.
Flat washer (M8)
× 1
Wire rope for ceiling
mount bracket
(2.0 mm (3/32") wire
diameter, 800 mm
(31-1/2") length)
× 1
