background image

ENGLISH - 3

Read this first!

Read this first!

WARNING:

Do not spill water on this product or allow this product to get wet.

Doing so may cause fire, electric shock, or malfunction due to short circuit 

or overheating.

 

f

Do not place a container with liquid close to this product.

 

f

Consult your dealer when liquid such as water is spilled on this 

product.

Do not place the supplied screws in a location that a child can reach.

Accidentally swallowing them can cause a physical harm.

 

f

Seek a medical advice immediately if a child might have swallowed a 

screw.

Do not disassemble or modify.

Doing so may cause electric shock or fire. It may also cause a malfunction.

Ask the qualified technician or your dealer to install or remove this 

product to/from the flat panel display.

Failure to do so may cause electric shock. It may also cause a 

malfunction.

Turn off the power and disconnect the power plug from the outlet 

when installing or removing this product to/from the flat panel 

display.

Failure to do so may cause electric shock.

CAUTION:

Do not place this product in a location with excessive humidity or 

dust, or in a location exposed to oil smoke or steam.

Doing so may cause fire or electric shock.

Do not place this product in extremely hot location.

Doing so may deteriorate the part, or may cause fire.

 

f

Do not install or store in a location with direct sunlight or close to the 

heating device, etc.

Turn off the power and disconnect the power plug from the outlet 

when installing or removing this product to/from the projector.

Failure to do so may cause electric shock.

Summary of Contents for ET-MDNDV10













Reviews: