Installing the interface board
6 - ENGLISH
Removing the interface board
1) Remove the interface board.
f
Use a Phillips-head screwdriver to turn the two screws with toothed lock washers securing the interface board counterclockwise and
remove. The removed screws with toothed lock washers will be used to secure the slot cover.
f
If the interface board is difficult to remove, insert the tip of a straight slot screwdriver between the right and left edges of the bracket
and the rear surface of the device to remove.
2) Attach the slot cover.
f
Attach the stored slot cover, and tighten to secure with the two screws with toothed lock washers removed in Step
1)
.
f
To replace with another interface board, follow the procedure in “Installing the interface board”.
Attention
f
Make sure to attach a slot cover to empty slots.
f
Place the removed interface board in an antistatic bag to store.
Specifications
The specifications of the interface board are as follows.
Power supply
Supplied from the Multi Window Processor
Compatible Multi Window
Processor
ET-MWP100G
r
Interface Board for DVI-U 2input (Model No.: ET-MCYDV100)
Terminal
<DVI-U INPUT> terminal (DVI-U 29p) 2 sets
Digital signal (DVI 1.0 compliant, HDCP compatible, single link only)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
HD/SYNC: TTL high impedance, automatic positive/negative polarity compatible
VD: TTL high impedance, automatic positive/negative polarity compatible
YC
B
C
R
/YP
B
P
R
signal
Y: 1.0 V [p-p], including synchronization signal, C
B
C
R
/P
B
P
R
: 0.7 V [p-p] 75 Ω
S-video signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
Video signal
1.0 V [p-p] 75 Ω
Dimensions
Width
97 mm (3-13/16")
Height
21 mm (13/16")
Depth
176 mm (6-15/16")
Weight
Approx. 107
]
(3.8 ozs.)
r
Interface Board for DVI-U 2output (Model No.: ET-MCQDV150)
Terminal
<DVI-U SCALED OUTPUT> terminal (DVI-U 29p) 2 sets
Digital signal (DVI 1.0 compliant, HDCP compatible, single link only)
RGB signal
YC
B
C
R
/YP
B
P
R
signal
Dimensions
Width
97 mm (3-13/16")
Height
21 mm (13/16")
Depth
176 mm (6-15/16")
Weight
Approx. 140
]
(4.9 ozs.)
r
Interface Board for 3G-SDI 2input (Model No.: ET-MCYSD200)
Terminal
<3G-SDI INPUT> terminal (BNC) 2 sets
3G-SDI signal
SMPTE ST 424 compliant
HD-SDI signal
SMPTE ST 292 compliant
SD-SDI signal
SMPTE ST 259 compliant
Dimensions
Width
97 mm (3-13/16")
Height
21 mm (13/16")
Depth
188 mm (7-13/32")
Weight
Approx. 106
]
(3.7 ozs.)
