E
nglish
-3
Lamp unit replacement procedure
1
Check that the area around the lamp unit has cooled down.
2
Use a Phillips screwdriver to loosen the two lamp unit cover fixing
screws at the rear of the projector until they turn freely, and then
remove the lamp unit cover.
3
Use a Phillips screwdriver to loosen the 3 lamp unit fixing screws
until the screws turn freely, and then hold the handles of the lamp
unit and gently remove the lamp unit from the projector.
4
Insert the new lamp unit while making sure that the direction is
correct, and then use a Phillips screwdriver to securely tighten the 3
lamp unit fixing screws.
When inserting the new lamp unit, be particularly sure to push it in at point (A).
NOTE:
●
Be sure to install the lamp unit and lamp unit cover securely.
Lamp unit
fixing screws
Lamp unit cover
Lamp unit cover
fixing screws
Lamp unit fixing screws
Handles
5
Install the lamp unit cover, and then use a Phillips screwdriver to
securely tighten the lamp unit cover fixing screws.
