ENGLISH - 3
Read this first!
WARNING:
Before replacing the projection lens, be sure to turn the power
off and disconnect the power plug from the wall outlet.
Unexpected projection of light may cause injury to eyes.
Replacing without removing the power plug may result in electrical shock.
CAUTION:
When moving or holding up the projector, be careful not to hold
the projection lens or the openings beside the projection lens.
Doing so may damage the projector.
Do not touch or remove any parts except for the specified parts
in this Installation Instructions.
Doing so may result in malfunctions, electrical shock, or accidents.
Do not place objects in front of the lens while the projector is be-
ing used.
Doing so can cause fire or damage to the object and can cause the projector to
malfunction.
z
Extremely strong light is emitted from the projector’s lens.
Do not open the desiccant bag. Do not eat the contents.
Inadvertently ingesting desiccant could be harmful.
z
If the desiccant gets into your eyes or mouth, immediately rinse with plenty of
water and seek medical attention.
z
Keep desiccant out of the reach of children.
Name and quantity of hazardous substances contained in the product
Part Name
Hazardous Substances
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyl
(PBB)
Polybrominated
Diphenyl Ether
(PBDE)
Projection lens
Mechanical
parts
Lens cap
This table is prepared in accordance with the provisions of SJ/T 11364.
○ ：
The amount of hazardous substances included in all homogeneous materials for the
relevant part does not exceed the limit specified in GB/T 26572.
：
The amount of hazardous substances included in all homogeneous materials for the
relevant part exceeds the limit specified in GB/T 26572.
Always follow these precautions
